NCTS POWER STRIP with Fast Charge USB Ports , 5 Ground Outlets  ,4 USB Ports 2.4A &  1A (Max 6A) |  Rated 16A,250V,4000W | Over current , Surge  protection |1.8 meters Cord | WHITE

POWER STRIP Fast Charge USB Ports 5 Outlets

Expert Features

Over – voltage protection

•        The universal usb power strip shall be shutdown when output voltage reaches to its over – voltage protection trigger point  6V Max .

Short circuit protection

•        No damage to the universal usb power strip power supply shall be sustained when operating any output under any line condition, into a short circuit condition for an indefinite period of time. The electrical outlet universal usb power strip shall be self – recovering when fault condition remove.

Over-current  protection

•         The Max point of over-current protection is 1.5 times of full-load current. The usb power strip would be self-recovering when over-current protection was removed.
•         The  electrical outlet usb power strip will be turned off for protection when the ampere is over 16A ,pls manual recover it

INPUT REQUIREMENTS

• The range of input voltage is from 176Vac to 264Vac
• The range of input frequency is from 47Hz to 53Hz
• The maximum input current is 16A
•  Power waste at the empty load ≤0.5W @Vin115Vac

OUTPUT REQUIREMENTS

• USB Outputs 5V/2.4A*2 5V/1A*2 (4USB MAX 6A)   5V±5%
• AC Outlets ,4000Watts
• Maximum peak to peak ripple & Noise 200mVp-p
• Temperature coefficient: ±0.05%/℃ typical on all output
• The universal usb usb power strip efficiency (watts out / watts in) is higher than 82% typical while measuring at nominal line and rated load.

RELIABILITY AND QUALITY CONTROL

[When the supply is operation within any of the limits of this specification the MTBF shall be at least 100,000 hours at 25℃(MIL-STD-217F). ]

[The electrical outlet usb power strip will be performed a minimum for 4 hours Burn-In at 40℃±5℃ under full load on all power supplies calculate MTBF. ]

Expert Specs